How to Wall Mount a TV


One of many largest benefits of recent TVs is that you could mount them on a wall, permitting for a extra cinematic viewing expertise and saving house. Whereas this {hardware} characteristic isn’t new by any means, TV producers are persistently benefiting from the aesthetic possibility. With new gimmicky TV fashions and presentation strategies popping out on a regular basis — together with TVs that roll up and down, and fashions from Samsung and LG that grasp like artworks in your front room — there’s by no means been a greater time to wall mount your subsequent TV. However earlier than you escape the drill and stud finder, it would be best to learn this how-to information we’ve put collectively, particularly if that is your first time mounting a brand new TV on a wall.

Wall mounting isn’t rocket science, however it does require a good bit of precision, care, and persistence. In any case, the very last thing you wish to expertise is your new set mendacity cracked in your hardwood flooring in a pile of crumbled drywall. Take a couple of minutes to learn and soak up our ideas, methods, and experience.

What top ought to my TV be on the wall?

You’re going to be clocking many hours along with your eyes glued to this TV, so the peak at which you mount it could be an important resolution you make. Whereas there’s some debate round whether or not larger is healthier, the perfect place for most individuals is eye degree, not trying up. Give it some thought: Nobody sits within the entrance rows of a movie show as a result of trying up on the display screen is a pressure on the neck and eyes. Nevertheless it’s additionally sensible to find out what “seated” means within the specific room your TV is in and the way you’ll be watching it.

For instance, when you’re going to be watching the sport sitting on bar stools or whereas enjoying darts or pool, you’re going to wish to mount the TV larger than you’ll when you’re slouched on the sofa binging your newest obsession.

To mount your TV at eye degree, sit down as you usually would in your most well-liked chair, stool, or sofa, and have a good friend or member of the family measure from the ground as much as your eye degree, preserving in thoughts others that could be watching the TV, too (a few inches in top isn’t going to make an enormous distinction).

This top goes to be the place the middle of your TV must be, not the highest or backside edges. Alternately, a great normal top, in accordance with Samsung, is 42-inches from the ground, which is roughly eye degree for somebody who’s 5-foot 6-inches tall. No matter top you resolve on, although, take a chunk of painter’s tape and stick it to the wall within the spot the place the middle might be. Then, have a seat and stare for a minute or 10. If it feels snug, you then’re good.

The scale of your TV can be going to play a small issue, as the peak of the TV (measured from the highest edge to the underside) divided in half goes to be the middle. In case you’re mounting on the wall above a chunk of furnishings, like an A/V cupboard, you simply need to just be sure you set the middle to provide your self sufficient clearance above the furnishings. For instance, in case your best eye-level top is 40 inches and you’ve got a cupboard that stands 20 inches, subtract the cupboard top out of your eye-level top, which provides you with 20 inches. Then, take the peak of your TV, say 32 inches, and divide that in half (16 inches) to get the space between the middle and the underside fringe of your TV. Because it’s beneath the 20-inch house, you’re good to go.

What about viewing distance?

In case you haven’t already executed your due diligence in figuring out what dimension TV you should purchase, a few of that call will come all the way down to how massive your room is and whether or not it offers sufficient house so that you can sit a cushty distance from the display screen, which can even play a task in figuring out the way you prepare your furnishings.

That can assist you resolve what’s best for you, you may take a look at our useful interactive information, however a normal rule of thumb is to measure the space out of your seat to your tv in inches and multiply by 0.84 (for instance, 78 inches x 0.84 = 65.2-inch display screen). This could provide the finest screen-size vary.

If in case you have your coronary heart set on a display screen dimension already, nonetheless, there are a number of viewing distance calculators that present you the perfect sitting distance you want primarily based on the TV dimension.

What shade ought to I paint the wall behind the TV?

TVs, particularly 65-inch panels or bigger and at the moment’s extra common fashions, are usually the point of interest of any room you place them in simply due to their sheer dimension. When selecting a wall shade to go behind your TV, simply as you’ll when portray in any other case, think about colours that can work finest with the room.

Portray with lighter, pure colours (beige, ivory, cream), for instance, is not going to solely make your room look greater however can even make the TV stand out on the wall.

With charcoals, midnight blues, and darker colours, nonetheless, the TV goes to mix in additional when it’s off whereas additionally making it appear brighter and extra vivid when it’s on, which many take into account a extra theatrical, immersive expertise. In case you don’t wish to decide to a very darkish room, a great compromise is to simply do an accent wall behind the TV.

Find out how to use a stud finder the appropriate approach

Electrical stud finders are tough little instruments. They are often one of the crucial useful devices within the field or the explanation you place a dozen additional holes within the wall. Listed below are 4 ideas that assist guarantee they will not trick you.

Step 1: Go slowly: To be efficient, stud finders must be correctly calibrated. First, place yours on the wall and switch it on — you may normally do that by urgent and holding in a button. Let the stud finder learn the density of the fabric (this may solely take a second or two), then slowly transfer it backward and forward. Shuttle over the wall a couple of instances, ranging from a distinct spot with every go.

Mark every stud you uncover with a chunk of painter’s tape. We advocate discovering three and utilizing a tape measure to ensure they’re the identical distance aside. It will make it easier to keep away from false positives.

Step 2: Popcorn texture defeated: Have you ever ever tried to run a stud finder throughout a ceiling with popcorn texturing? Not solely do you smash the feel, however the stud finder additionally doesn’t work nicely. A simple option to overcome this downside is to put a chunk of cardboard over the realm you wish to scan. The cardboard provides the stud finder a clean floor to slip throughout and can can help you simply discover the joists.

Step 3: Don’t overlook fireplace blocks: Earlier than you drill holes, run your stud finder vertically up and down the wall to make sure no fireplace blocks are working horizontally between the stud bays. Hearth blocks could make fishing wires down the wall very tough, even for skilled installers.

Step 4: All the time double-check: Stud finders will be fooled pretty simply. They’ll usually learn a seam within the drywall as a stud. After you have got marked your studs and the place you wish to drill your holes, it’s best to use one thing to poke into the wall to make sure you truly marked a stud.

We usually use a small precision screwdriver, however a cutoff coat hanger or piano wire will work high quality. We’d advocate doing this by hand, fairly than utilizing an influence software, as you should have a greater really feel for what’s contained in the wall. You may also faucet a small nail into the wall, and when you get previous the drywall with out the nail “falling in,” you’ve discovered a stud.

The ultimate step it’s best to take earlier than drilling is to poke a bit gap to the left and proper of the place you wish to drill and be sure you are nonetheless on the stud. It will guarantee you might be centered on a stud and never simply clipping its facet (and presumably hitting electrical wiring).

Assist! The studs are within the mistaken spot — or there aren’t any

You discovered the right spot to mount a TV in your house. You’ve learn all of our recommendations on utilizing a stud finder, and are able to go. However after 20 minutes of scanning for studs, you may’t discover any, the outcomes are inconsistent, or they don’t line up with the holes in your wall mount. There are a number of options that don’t require a lot, if any, additional work to repair your little downside.

Step 1: Take off covers: In case you can’t find the studs with a stud finder, find an outlet on the wall (or every other fixture, like a chilly air return). All shops are hooked up to studs until they have been added after the wall was up (not widespread).

By taking off the wall plate, you may stick a skinny software into the hole between the facet of {the electrical} field and the drywall, after which really feel which facet the stud is on. From there, measure over 16 inches and it’s best to discover one other stud. Maintain going 16 inches at a time till you might be within the space the place you wish to mount the TV. Then use a small software to poke a gap within the wall to see if a stud is de facto there.

Step 2: Make your personal holes: What when you discover studs, however they don’t line up with the holes in your wall-mounting bracket? Simple: Make holes on the wall bracket. One of the best ways to do that is to make use of a step drill bit (like an Irwin Unibit) and a strong drill. A superb step drill bit will shortly minimize by a metal wall mount.

Step 3: Use a toggle: If there merely aren’t any studs the place you wish to mount the TV, then that you must use some type of hole wall anchor. These will be extraordinarily robust, however as a normal rule, they shouldn’t be used with full-motion or articulating mounts. It is because the power exerted on the bracket-arm whenever you pull the TV out and in can successfully rip the wall bracket straight off the anchors. The quarter-inch Snaptoggle is among the finest round, and some of them can comfortably maintain new 55-inch TVs on a single sheet of drywall.

Mounting a TV on drywall or plaster with out attaching it to a stud generally is a very protected and dependable resolution if the bounds of the wall and the toggles. Skilled residence theater installers use these repeatedly. We all know of different installers who overestimated the power of the wall and ended up with a TV on the bottom. Ultimately, when you aren’t snug performing the set up, take into account hiring knowledgeable.

Please, conceal all the cords within the wall

Nothing ruins the look of a pleasant tv mounted on the wall faster than a tangle of uncovered wires. Fortunately, hiding cables contained in the wall is pretty low-cost and straightforward. The only option to obtain that is with an IWPE (in-wall energy extension) or an influence relocation equipment. These kits include every part that you must run energy as much as your TV whereas hiding your entire sign wires (some even include a chopping software). You could be pondering: “Why not simply drop an extension wire within the wall as a substitute of putting in an outlet?” Properly, it’s truly towards Nationwide Electrical Code (NEC) to drop an influence wire or extension wire contained in the wall. It’s additionally not authorized to place low-voltage cables like HDMI contained in the wall until they’re CL3-rated for in-wall use, which is one purpose costly HDMI cables are value shopping for.

You could not want the additional HDMI ports in your TV now, however it’s possible you’ll wish to add elements to your property theater system sooner or later. Put in additional HDMI cables and run them by the wall now so that you’ve got them whenever you want them.

An IWPE is strictly what it feels like — an extension wire rated to go contained in the wall. Ultimately, you should have an outlet behind your TV, and what’s known as an inlet down by the ground (on the identical top as your different shops). To supply energy to the equipment, you join an extension wire from an current outlet to the inlet. Confused? The photographs on this equipment clarify it clearly.

Earlier than you start the set up, guarantee your low-voltage cables are rated for in-wall use. The following factor to learn about IWPE kits is that they arrive with a predetermined size {of electrical} wire, usually 6 to eight ft. Additionally observe that they need to be used solely in a single stud bay, and they aren’t designed to be used above a fire. These limitations will be overcome or ignored, however we don’t advocate bending the principles.

If you wish to mount a TV above a fire (which we usually advise towards), and there’s no electrical outlet above the mantle, we advocate hiring a licensed electrician for the job. If there’s a close-by outlet (flooring degree), they are able to faucet off the present outlet to get energy as much as your hearth. We additionally advise you to have the electrician run further A/V cables for you. HDMI, coaxial, and speaker wire are by no means enjoyable to run after a accomplished wall-mounting job, particularly when it’s above a fire.

In case you can’t conceal cables contained in the wall, then attempt putting in a paintable wire channel. Most of those merely keep on with the wall and can help you conceal your entire cables inside, offering for a clear look. Simply know that whenever you take away the wire channel, you’ll doubtless additionally take away the paint.

Choosing the proper cable size

It doesn’t matter in case your TV is occurring a wall or sitting on a stand — purchase longer cables than you suppose you want. That is essentially the most ignored piece of recommendation we give individuals. Further wire will be wrapped up, stuffed in a wall, or in any other case hidden. If the cables are too quick, you danger them falling out, merely not reaching, breaking, or worse but, damaging your tools.

For a typical flat-panel set up, with a tilting wall TV mount and tools situated instantly beneath the TV, 8-foot cables will work properly. Twelve-foot cables will can help you make connections earlier than the TV is on the wall, or pull out the tools as soon as it is connected. In case you’re mounting a TV larger than regular (the underside of the common TV is between 36 inches and 46 inches from the ground) or utilizing a full-motion mount, you’ll want 12-foot cabling. If that appears extreme, take into account this: On a typical full-motion mount with a 20-inch arm, you’ll use Three to Four ft of cable earlier than even reaching the wall — that’s, if it’s correctly routed to permit protected motion of the TV on the arm.

A ultimate observe on cables: Attempt to keep away from these with cumbersome connectors. All these cables may not match correctly behind a slim tv, and even plug in for that matter.

Leveling your TV appropriately

The whole lot is minimize, drilled, assembled, tightened, and in any other case wrapped up. You step again to try your newly wall-mounted TV, however one thing isn’t proper. The TV isn’t degree.

What do you do? Do that you must pull it down? Drill new holes within the wall? Cry? Cry actually onerous? In all probability not one of the above. There may be virtually all the time a option to degree a crooked TV. Simply know that typically a TV won’t ever look degree if the ceiling, flooring, or mantle isn’t degree (so make sure that your viewing angle isn’t deceiving you). Examine these different areas earlier than you go mad making an attempt to degree the flat-screen TV.

Step 1: Put your again into it: Stroll as much as the TV because it hangs on the wall, seize onto the perimeters, after which attempt to power it into being degree. No, actually. Your success right here is determined by how cosy the bolts are that maintain the wall mount arms on the again of the TV. In the event that they aren’t overtightened, it’s best to have a bit wiggle room to assist degree the TV. As a facet observe, when you do that and the TV comes off the wall, you probably did one thing mistaken — so watch out.

Step 2: Loosen, push, tighten: Take the TV off the wall, loosen the bolts holding the arms on the again of the TV, then push up/down on the arms as you tighten them again down. Put the TV again on the wall and see if it’s degree. If it isn’t, then do the identical factor with the wall plate.

Step 3: Improvise: In case you used up all the wiggle room out there and it nonetheless isn’t degree, make extra wiggle room. You should utilize the step drill bit we talked about earlier to spherical out the holes within the arms or wall plate. This may occasionally provide the little additional house wanted — simply don’t go too loopy and make the holes unusable. In case you by accident make the holes so massive that bolts slip by, you may all the time purchase bigger washers.

The entire ideas listed come from years of firsthand expertise mounting TVs on wooden studs, metal studs, plaster, brick, from the ceiling, you title it. A few of them are widespread sense, however virtually none might be present in an instruction guide. If in case you have the appropriate instruments, a couple of hours, and persistence, then you may mount your personal TV. Do you’ll want to funds your time appropriately, although. A easy wall mount (tilting mount, drywall, uncovered wiring) may take knowledgeable solely 20 minutes from unboxing to completed set up. A novice ought to plan to learn the directions, proceed cautiously, and release a day as a result of, let’s face it: Breaking a TV isn’t enjoyable.

Editors’ Suggestions